Cooling towers remove heat from process water by evaporation and latent heat transfer between hot water and air. The two types of towers are crossflow and counterflow. Crossflow towers introduce the airflow at right angles to the water flow throughout the structure. In counterflow cooling towers, hot process water is pumped to the uppermost plenum and allowed to fall through the tower. Numerous slats or spray nozzles located throughout the length of the tower disperse the water and help in cooling. Air enters at the tower bottom and flows upward against the water. When the fans or blowers are at the air inlet, the air is considered to be forced draft. Induced draft is when the fans are at the air outlet.